logo_e
Chinese
Korean
Japanese
English
PRODUCTS SEARCH
HOME > Applications > Basic Oxygen Furnace Sensor

Applications

Microwave Sensors
Microwave Sensor Applications
Factory Automation Devices
DELTA社製品関連

Microwave Sensor Applications

For Ironworks - BOF

Microwave Sensor Applications

Basic Oxygen Furnace Sensor
MWS-10RF

The MWS-10RF-1 type Range Finder consists of a controller, antenna, and waveguide. The MWS-10RF-1 is an FM-CW method Range Finder and it can be installed in a robotic arm.
The robotic arm swivels towards the lance hole before the blowing process and, after measurement it retracts to the resting position.

Features

  • Unaffected by adverse conditions
    The antenna, which is the sensing head, can be installed in the high temperature zone without the need of additional cooling devices.
    The antenna and controller are easily connected by circular waveguide tubing, using special 90° turns and straight pieces.
    Microwaves are unaffected by temperature, flames, vapour, airborne particles or dirt.
  • High accuracy and reliability
    Error less than 10mm.
    False measurements caused by double-reflected waves are eliminated through the use of rotary microwaves.
    The accuracy of the measured range is not affected by fluctuating temperatures nor does it deteriorate over extended periods.
    Utilizes filters which eliminate spurious signals.
  • The operational state is shown on your personal computer
    It displays a FFT spectrum, the received signal and various preset values.
    The received signal, FFT spectrum and the trend measurement are continuously displayed. This displayed data can be recorded and reviewed in real or accelerated time.
    Use of the recording and reviewing capabilities allows the system parameters to be optimised offline.
    The display indicates and outputs the internal temperature and any abnormal conditions. (i.e. a lowering of received signal power, rising temperature in the controller, software version mismatch and communication failures.)
  • Convenient built in functions
    A reference point and the required range can be preset. The length of waveguide is easily subtracted from the overall distance measured.
    Compatible for use with a personal computer.
    Automatic power supply 90~240V, 50/60Hz.
    Communicates with computer by RS-232C.
    4-20mA, analogue output.
    RS-422 digital output and input terminals.
  • Lightweight and compact
    Portable (5.7kg controller only)
    Easy installation.
  • High versatility
    Both hardware and software can be modified to suit your requirements.

BASIC OXYGEN FURNACE SENSOR
ANIMATION

MWS-10RF Catalog[PDF]